Subaru 2002 IMPREZA Service Manual page 1556

AUTOMATIC TRANSMISSION
14) Set the ST.
NOTE:
Also the ENGINE
41099AA010 can be used.
ST 41099AA020 ENGINE SUPPORT ASSY
15) Remove the bolt which holds right upper side of
transmission to engine.
16) Lift-up the vehicle.
17) Remove the under cover.
18) Remove the front, center, rear exhaust pipe
and muffler. (Non-turbo model) <Ref. to EX(w/
oOBD)-9, REMOVAL, Front Exhaust Pipe.>, <Ref.
to EX(w/oOBD)-13, REMOVAL, Rear Exhaust
Pipe.> and <Ref. to EX(w/oOBD)-14, REMOVAL,
Muffler.> or <Ref. to EX-7, REMOVAL, Front Ex-
haust Pipe.>, <Ref. to EX-11, REMOVAL, Rear Ex-
haust Pipe.> and <Ref. to EX-12, REMOVAL,
Muffler.>
19) Remove the center, rear exhaust pipe and muf-
fler. (Turbo model)
<Ref. to EX(TURBO)-8, REMOVAL, Center Ex-
haust Pipe.>, <Ref. to EX(TURBO)-13, REMOVAL,
Rear Exhaust Pipe.> and <Ref. to EX(TURBO)-14,
REMOVAL, Muffler.>
20) Remove the heat shield cover. (If equipped)
AUTOMATIC TRANSMISSION ASSEMBLY
SUPPORT BRACKET
G2M0313
B3M2044
21) Drain the ATF to remove the ATF drain plug.
(A) Oil pan
(B) Drain plug
22) Disconnect the ATF cooler hoses from pipes of
transmission side, and remove the ATF level gauge
guide.
23) Remove the propeller shaft. <Ref. to DS-15,
REMOVAL, Propeller Shaft.>
24) Remove the shift select cable. <Ref. to CS-9,
REMOVAL, Select Cable.>
25) Disconnect the stabilizer link from transverse
link.
AT-20
B3M1036C
B3M2191