C: DISASSEMBLY
1) Remove the spring.
(A) Spring
2) Remove the lever, cushion and bush.
(A) Washer
(B) Bush
(C) Plate COMPL
(D) Cushion
(E) Lever COMPL
D: ASSEMBLY
1) Assemble in the reverse order of disassembly.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
2) Make sure the select lever moves smoothly.
E: INSPECTION
1) Make sure the select lever moves smoothly. If it
does not move smoothly, repair or replace it.
2) Make sure the drive select lever is not damaged.
If it is damaged, repair or replace it.
MT DRIVE SELECT LEVER
B3M2132A
B3M2133A
CS-19
CONTROL SYSTEMS