Subaru 2002 IMPREZA Service Manual page 1861

2. EXCEPT 2.5 L MODEL
1) Install the flywheel and ST.
ST 498497100 CRANKSHAFT STOPPER
2) Tighten the flywheel attaching bolts to the spec-
ified torque.
NOTE:
Tighten the flywheel installing bolts gradually. Each
bolt should be tightened to the specified torque in a
crisscross fashion.
Tightening torque:
72 N·m (7.3 kgf-m, 52.8 ft-lb)
3) Install the clutch disc and cover. <Ref. to CL-21,
EXCEPT 2.5 L MODEL, INSTALLATION, Clutch
Disc and Cover.>
4) Install the transmission assembly. <Ref. to MT-
37, INSTALLATION, Manual Transmission Assem-
bly.>
FLYWHEEL
C: INSPECTION
CAUTION:
Since this bearing is grease sealed and is of a
non-lubrication type, do not wash with gasoline
or any solvent.
1) Damage of facing and ring gear
If defective, replace the flywheel.
• 2.5 L MODEL
B2M3361A
• Except 2.5 L MODEL
B2M0331B
2) Smoothness of rotation
Rotate the ball bearing applying pressure in thrust
direction.
3) If noise or excessive play is noted, replace the
flywheel.
CL-25
(A) Flywheel
(B) Ring gear
(A) Flywheel
(B) Ring gear
CLUTCH SYSTEM
B2M3353B
S2M1851A