Subaru 2002 IMPREZA Service Manual page 2143

DIAGNOSTICS CHART WITH DIAGNOSIS CONNECTOR
Step
13 CHECK ABSCM&H/U.
1)Connect all connectors.
2)Erase the memory.
3)Perform the inspection mode.
4)Read out the DTC.
14 CHECK ANY OTHER DIAGNOSTIC TROU-
BLE CODES (DTCs) APPEARANCE.
Check
Is the same DTC as in current
diagnosis still being output?
Are other DTCs being output? Proceed with the
ABS-45
ABS (DIAGNOSTICS)
Yes
Replace the Go to step 14.
ABSCM&H/U.
<Ref. to ABS-7,
ABS Control Mod-
ule and Hydraulic
Control Unit
(ABSCM&H/U).>
A temporary poor
diagnosis corre- contact.
sponding to the
NOTE:
DTC.
Check the harness
and
between
SCM&H/U
ABS sensor.
No
connectors
AB-
and