Subaru 2002 IMPREZA Service Manual page 2103

Step
4 PERFORM THE DIAGNOSIS.
1)Inspect using "Diagnostics Chart with Sub-
aru Select Monitor".<Ref. to ABS-92, Diagnos-
tics Chart with Subaru Select Monitor.>
NOTE:
For DTC list, refer to "List of Diagnostics Trou-
ble Code (DTC)".<Ref. to ABS-24, WITHOUT
SUBARU SELECT MONITOR, LIST, List of Di-
agnostics Trouble Code (DTC).>
2)Repair trouble cause.
3)Perform the clear memory mode. <Ref. to
ABS-19, CLEAR MEMORY MODE, OPERA-
TION, Subaru Select Monitor.>
4)Perform the inspection mode. <Ref. to ABS-
21, Inspection Mode.>
5)Calling up the DTC. <Ref. to ABS-18, READ
DIAGNOSTIC TROUBLE CODE (DTC),
OPERATION, Subaru Select Monitor.>
BASIC DIAGNOSTIC PROCEDURE
Is no DTC designated and
does the ABS warning light go
out after turning on?
ABS-5
Check
Complete the
diagnosis.
ABS (DIAGNOSTICS)
Yes No
Inspect using
"Diagnostics Chart
with Subaru Select
Monitor". <Ref. to
ABS-92, Diagnos-
tics Chart with
Subaru Select
Monitor.>