Subaru 2002 IMPREZA Service Manual page 1860

CLUTCH SYSTEM
3. Flywheel
A: REMOVAL
1. 2.5 L MODEL
1) Remove the transmission assembly. <Ref. to
MT-33, REMOVAL, Manual Transmission Assem-
bly.>
2) Remove the clutch cover and clutch disc. <Ref.
to CL-20, REMOVAL, Clutch Disc and Cover.>
3) Remove the flywheel using ST1 and ST2.
ST1 498497100 CRANKSHAFT STOPPER
ST2 499057000 TORX PLUS
(A) Flywheel
2. EXCEPT 2.5 L MODEL
1) Remove the transmission assembly. <Ref. to
MT-33, REMOVAL, Manual Transmission Assem-
bly.>
2) Remove the clutch cover and clutch disc. <Ref.
to CL-20, REMOVAL, Clutch Disc and Cover.>
3) Using the ST, remove the flywheel.
ST 498497100 CRANKSHAFT STOPPER
(A) Flywheel
FLYWHEEL
B: INSTALLATION
1. 2.5 L MODEL
1) Install the flywheel and ST.
ST 498497100
2) Tighten the flywheel attaching bolts to the spec-
ified torque.
ST 499057000
NOTE:
Tighten the flywheel installing bolts gradually. Each
bolt should be tightened to the specified torque in a
crisscross fashion.
B2M3347B
Tightening torque:
72 N·m (7.3 kgf-m, 52.8 ft-lb)
3) Install the clutch disc and cover. <Ref. to CL-20,
2.5 L MODEL, INSTALLATION, Clutch Disc and
Cover.>
4) Install the transmission assembly. <Ref. to MT-
37, INSTALLATION, Manual Transmission Assem-
bly.>
B2M0332B
CL-24
CRANKSHAFT STOPPER
B2M3359A
TORX PLUS
B2M3360A