Subaru 2002 IMPREZA Service Manual page 2202
Hide thumbs
Also See for 2002 IMPREZA:
- Service manual (4627 pages) ,
- Owner's manual (418 pages) ,
- Service manual (152 pages)
Table of Contents
Advertisement
DIAGNOSTICS CHART WITH SUBARU SELECT MONITOR
ABS (DIAGNOSTICS)
Step
9
CHECK BATTERY SHORT OF ABS SEN-
SOR.
1)Disconnect the connector from ABSCM&
H/U.
2)Measure the voltage between ABS sensor
and chassis ground.
Terminal
Front RH No. 1 (+) — Chassis ground ( − − − − ):
Front LH No. 1 (+) — Chassis ground ( − − − − ):
Rear RH No. 1 (+) — Chassis ground ( − − − − ):
Rear LH No. 1 (+) — Chassis ground ( − − − − ):
10
CHECK BATTERY SHORT OF ABS SEN-
SOR.
1)Turn the ignition switch to ON.
2)Measure the voltage between ABS sensor
and chassis ground.
Terminal
Front RH No. 1 (+) — Chassis ground ( − − − − ):
Front LH No. 1 (+) — Chassis ground ( − − − − ):
Rear RH No. 1 (+) — Chassis ground ( − − − − ):
Rear LH No. 1 (+) — Chassis ground ( − − − − ):
11
CHECK HARNESS/CONNECTOR BETWEEN
ABSCM&H/U AND ABS SENSOR.
1)Turn the ignition switch to OFF.
2)Connect the connector to ABS sensor.
3)Measure the resistance between
ABSCM&H/U connector terminals.
Connector & terminal
DTC 21 / LHD: (B301) No. 11 — No. 12:
RHD: (F49) No. 11 — No. 12:
DTC 23 / LHD: (B301) No. 9 — No. 10:
RHD: (F49) No. 9 — No. 10:
DTC 25 / LHD: (B301) No. 14 — No. 15:
RHD: (F49) No. 14 — No. 15:
DTC 27 / LHD: (B301) No. 7 — No. 8:
RHD: (F49) No. 7 — No. 8:
12
CHECK BATTERY SHORT OF HARNESS.
Measure the voltage between ABSCM&H/U
connector and chassis ground.
Connector & terminal
DTC 21 / LHD: (B301) No. 11 (+) — Chas-
sis ground ( − − − − ):
RHD: (F49) No. 11 (+) — Chassis ground
( − − − − ):
DTC 23 / LHD: (B301) No. 9 (+) — Chas-
sis ground ( − − − − ):
RHD: (F49) No. 9 (+) — Chassis ground
( − − − − ):
DTC 25 / LHD: (B301) No. 14 (+) — Chas-
sis ground ( − − − − ):
RHD: (F49) No. 14 (+) — Chassis ground
( − − − − ):
DTC 27 / LHD: (B301) No. 7 (+) — Chas-
sis ground ( − − − − ):
RHD: (F49) No. 7 (+) — Chassis ground
( − − − − ):
Check
Is the voltage less than 1 V?
Is the voltage less than 1 V?
Is the resistance between 1
and 1.5 kΩ?
Is the voltage less than 1 V?
ABS-104
Yes
Go to step 10.
Replace the ABS
sensor. Front:
<Ref. to ABS-14,
Front ABS Sen-
sor.> Rear: <Ref.
to ABS-17, Rear
ABS Sensor.>
Go to step 11.
Replace the ABS
sensor. Front:
<Ref. to ABS-14,
Front ABS Sen-
sor.> Rear: <Ref.
to ABS-17, Rear
ABS Sensor.>
Go to step 12.
Repair the har-
ness/connector
between
ABSCM&H/U and
ABS sensor.
Go to step 13.
Repair the har-
ness between
ABSCM&H/U and
ABS sensor.
No
Advertisement
Chapters
Table of Contents
