MANUAL TRANSMISSION AND DIFFERENTIAL
5) Inspect the clearance between 5th drive gear
and coupling sleeve. If any clearance is not within
specifications, replace the shifter fork as required.
Clearance (a):
9.3 mm (0.366 in)
(A) 5th drive gear
(B) Coupling sleeve
5th shifter fork (Non-turbo)
Part No.
Mark
32812AA201
32812AA211
32812AA221
5th shifter fork (Turbo)
Part No.
Mark
32812AA231
32812AA241
—
32812AA251
SHIFTER FORK AND ROD
S3M0191A
Remarks
Approach to 5th gear
4
by 0.2 mm (0.008 in).
5
Standard
Become distant from
6
5th gear by 0.2 mm
(0.008 in).
Remarks
Approach to 5th gear
7
by 0.2 mm (0.008 in).
Standard
Become distant from
9
5th gear by 0.2 mm
(0.008 in).
6) Inspect the rod end clearances (A) and (B). If
any clearance is not within specifications, replace
the rod or fork as required.
Clearance (A):
1st — 2nd to 3rd — 4th:
0.4 — 1.4 mm (0.016 — 0.055 in)
Clearance (B):
3rd — 4th to 5th:
0.5 — 1.3 mm (0.020 — 0.051 in)
MT-108
B3M0530A