Subaru 2002 IMPREZA Service Manual page 1777

Hide thumbs Also See for 2002 IMPREZA:

Table of Contents

E: INSPECTION

Replace the bearings in the following cases:

• Broken or rusty bearings

• Worn or damaged

• Bearings that fail to turn smoothly or make ab-

normal noise when turned after gear oil lubrication.

2) Drive gear

Replace the drive gear in the following cases:

• If their tooth surfaces and shaft are excessively

broken or damaged.

3) Measure the clearance between snap ring and

inner race of ball bearing with a thickness gauge.

0.01 — 0.15 mm (0.0004 — 0.0059 in)

If the measurement is not within specification, se-

lect a suitable snap ring.

Snap ring (Outer-30)

TRANSFER DRIVE GEAR

Thickness mm (in)

1.53 (0.0602)

1.65 (0.0650)

1.77 (0.0697)

MANUAL TRANSMISSION AND DIFFERENTIAL

Chapters

Table of Contents

2001 impreza