CONTROL SYSTEMS
6) Tighten with lock wire to the extent that the boot
will not come off.
NOTE:
Always use a new lock wire.
(A) Lock wire
(B) Stay
7) Insert the rod into boot hole.
8) Connect the rod to gear shift lever.
Tightening torque:
11.8 N·m (1.2 kgf-m, 8.7 ft-lb)
(A) Rod
(B) Lever
(C) Stay
MT GEAR SHIFT LEVER
9) Check the swing torque of the rod in relation to
gear shift lever.
If the torque exceeds specification, replace the
bush or retighten nuts.
Rocking torque:
0.7 N·m (0.07 kgf-m, 0.5 ft-lb) or less
B3M0617C
10) Check that there is no excessive play and that
parts move smoothly.
B3M1828A
CS-16
(A) Center of rotation
(B) Swing torque
B3M1829C