Subaru 2002 IMPREZA Service Manual page 1869

4) Remove the oil seal.
5) Move the cylinder boot backward.
(B)
(A) Cylinder boot
(B) Master cylinder
6) Remove the stop ring.
CAUTION:
Be careful when removing the snap ring to pre-
vent the rod, washer, piston and return spring
from flying out.
7) Remove the air bleeder.
MASTER CYLINDER
TR0525
(A)
TR0473
D: ASSEMBLY
1. EXCEPT RHD TURBO MODEL
1) Install the clutch damper.
Tightening torque:
46.6 N·m (4.75 kgf-m, 34.4 ft-lb)
2) Apply a coat of grease to the contacting surfaces
of the push rod and piston before installation.
Grease:
SILICONE GREASE G40M (Part No.
004404003)
3) To assemble the master cylinder, reverse the
sequence of disassembly procedure.
Tightening torque:
10 N·m (1.0 kgf-m, 7 ft-lb)
CL-33
CLUTCH SYSTEM
TR0474