14.3.6.2
set pwa
Use this command to enable or disable port web authentication.
set pwa {enable | disable}
NOTE: Port Web Authentication cannot be enabled if either MAC authentication or
EAPOL (802.1X) is enabled. For information on disabling 802.1X, refer to
Section
14.3.5.3. For information on disabling MAC authentication, refer to
Section
14.3.7.3.
Syntax Description
enable | disable
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable port web authentication:
Matrix(rw)->set pwa enable
Enables or disables port web authentication.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Security Configuration Command Set
Configuring Port Web Authentication (PWA)
14-57