display
saved-configuration
Syntax
display saved-configuration
View
Any view
Parameter
None
Description
Use the display saved-configuration command to view the configuration files in
the flash memory or CF card of Switch.
If the the switch works abnormally after electrified, execute the display
saved-configuration command to view the startup configuration of the Switch.
Related command: save, reset saved-configuration and display
current-configuration.
Example
# Display configuration files in flash memory or CF card of the switch.
<SW8800> display saved-configuration
#
sysname 3Com
#
local-user abc password simple abc
#
tcp window 8
#
interface Aux7/1/1
link-protocol ppp
#
interface Ethernet2/1/1
#
interface Ethernet2/1/2
#
interface Ethernet2/1/3
ip address 10.110.101.17 255.255.255.0
#
interface NULL0
#
ospf 1
#
ip route-static 10.12.0.0 255.255.0.0 Ethernet 12/1/0
#
user-interface con 0
user-interface aux 0
user-interface vty 0 4
authentication-mode none
#
return
The displayed information is global, port and user configurations.
Configuration File Management Commands
71