Igmp Group-Limit; Igmp Group-Policy - 3Com 8807 Command Reference Manual

608 C 35: IGMP C C
HAPTER ONFIGURATION OMMANDS
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] igmp fast-leave
[SW8800] undo igmp fast-leave vlan 5
# Disable IGMP fast leave in all VLANs.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] undo igmp fast-leave

igmp group-limit

Syntax
igmp group-limit limit
undo igmp group-limit
View
Interface view
Parameter
limit: Quantity of multicast groups, in the range of 0 to 512.
Description
Use the igmp group-limit command to limit multicast groups to be added on an
interface. After the limit is reached, the router does not process IGMP join
messages.
Use the undo igmp group-limit command to restore the default setting.
By default, the maximum number is 512.
The new configuration overwrites the old one if you run the command for a
second time.
Example
# Limit the maximum number of IGMP groups to be added on Vlan-interface10 to
100.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800]interface vlan-interface 10
[3Com-Vlan-interface10] igmp group-limit 100

igmp group-policy

Syntax
igmp group-policy acl-number
undo igmp group-policy
View
VLAN view
Parameter
acl-number: Number of basic ACL, in the range of 2,000 to 2,999.