3Com 8807 Command Reference Manual page 717

Table 94 Description on the fields of the command
Field Description
I/O-LABEL Incoming/Outgoing label. VPN labels (labels advertised with VPNV4
routes) will be displayed in case of uni-hop EBGP cross-AS MPLS L3 VPN
networking, and tunneling labels (labels advertised with unicast routes
and labels advertised by LDP protocol) will be displayed in case of
multi-hop EBGP cross-AS MPLS L3 VPN networking.
NEXTHOP Next hop
IN-INTERFACE Ingress interface
OUT-INTERFACE Egress interface
# Display MPLS L3VPN ingress lsp information on PE (Provider Edge).
<SW8800> display mpls l3vpn-lsp ingress
-------------------------------------------------------------------
LSP Information: L3vpn Ingress Lsp
-------------------------------------------------------------------
Vpn-instance Name: vpna
NO FEC
1 168.3.1.0/24
TOTAL: 1 Record(s) Found.
Table 95 Description on the fields of the command
Field Description
NO Number
FEC Forwarding equivalent class
NEXTHOP Next hop
OUTER-LABEL Outer label (MPLS Tunneling Label)
OUT-INTERFACE Egress interface
# Display MPLS L3VPN egress lsp information on PE.
<SW8800> display mpls l3vpn-lsp egress
----------------------
LSP Information: L3vpn Egress Lsp
-------------------------------------------------------------------
NO VRFNAME
1 vpna
TOTAL: 1 Record(s) Found.
Table 96 Description on the fields of the command
Field Description
NO Number
VRFNAME Name of VPN Instance
INNER-LABEL Inner label (VPN label)
NEXTHOP Next hop
OUT-INTERFACE Egress interface
LDP Configuration Commands
Route Distinguisher: 100:1
NEXTHOP OUTER-LABEL OUT-INTERFACE
10.10.1.1 1026(vpn)
-------------------------------------------
INNER-LABEL NEXTHOP
4096 0.0.0.0
715
Vlan10
OUT-INTERFACE
InLoop0