Reset Multicast Routing-Table - 3Com 8807 Command Reference Manual

596 C 33: M C C C
HAPTER ULTICAST OMMON ONFIGURATION OMMANDS
group-mask-length: Mask length of multicast group address.
source-address: Source address.
source-mask: Mask of source address.
source-mask-length: Mask length of source address.
incoming-interface: Specifies incoming interface for the multicast forward entry.
null: Incoming-interface is null.
NULL-interface-number: The only number is 0.
interface-type interface-number: Interface type and interface number.
Description
Use the reset multicast forwarding-table command to clear MFC forwarding
entries or the statistic information of MFC forwarding entries.
You can type in source address first and group address after in the command, as
long as they both are valid addresses. The system prompts error information if you
type in invalid addresses.
Related command:: reset pim routing-table, reset multicast routing-table,
display multicast forwarding-table.
Example
# Clear the forwarding entry with address of 225.5.4.3 from the MFC forwarding
table.
<SW8800> reset multicast forwarding-table 225.5.4.3
# Clear statistic information of the forwarding entry with address of 225.5.4.3
from the MFC forwarding table.
<SW8800> reset multicast forwarding-table statistics 225.5.4.3
reset multicast Syntax
routing-table
reset multicast routing-table { all | { group-address [ mask { group-mask |
group-mask-length } ] | source-address [ mask { source-mask | source-mask-length
} ] | incoming-interface vlan-interface interface-number } * }
View
User view
Parameter
all: All route entries in the core multicast routing table.
group-address: Multicast group address.
group-mask: Mask of multicast group address
group-mask-length: Mask length of multicast group address.