Peer Public-As-Only; Peer Reflect-Client - 3Com 8807 Command Reference Manual

674 C 38: MBGP M
HAPTER

peer public-as-only

peer reflect-client

E C
ULTICAST XTENSION ONFIGURATION
[3Com-bgp] ipv4-family multicast
[3Com-bgp-af-mul] peer test next-hop-local
Syntax
peer group-name public-as-only
undo peer group-name public-as-only
View
IPv4 multicast sub-address family view
Parameter
group-name: Name of the peer group.
Description
Use the peer public-as-only command to set to contain only public AS IDs in the
MBGP Update message, but not private AS IDs.
Use the undo peer public-as-only command to restore the default setting, the
router contains only private AS IDs in the MBGP Update message.
By default, the private AS ID is carried when BGP sends MBGP Update message.
Generally, MBGP sends MBGP Update message with the AS ID (which can be
either the public AS number or private AS number) contained. To enable some
egress routers to ignore the private AS ID when sending MBGP Update message,
you can configure not to carry the private AS IDs when sending MBGP Update
message.
Example
# Set not to carry private AS IDs when sending MBGP Update message to peer
group "test".
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] bgp 100
[3Com-bgp] ipv4-family multicast
[3Com-bgp-af-mul] peer test public-as-only
Syntax
peer group-name reflect-client
undo peer group-name reflect-client
View
IPv4 multicast sub-address family view
Parameter
group-name: Name of the peer group.
C
OMMANDS