Peer Next-Hop-Local - 3Com 8807 Command Reference Manual

MBGP Multicast Extension Configuration Commands 673
peer-address: IP address of the peer, in dotted decimal format.
prefixname: Name of the specified ip-prefix, a character string of 1 to 19
characters.
Description
Use the peer ip-prefix import command to configure the route filtering policy of
routes received by the peer based on the ip-prefix.
Use the undo peer ip-prefix import command to cancel the route filtering policy
of the peer based on the ip-prefix.
By default, the route filtering policy of the peer is not specified.
The inbound route policy configured for the peer takes precedence over the
configurations for the peer group.
Related command: peer ip-prefix export.
Example
# Configure the route filtering policy of the peer group1 based on the ip-prefix
list1.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] bgp 100
[3Com-bgp] ipv4-family multicast
[3Com-bgp-af-mul] peer group1 ip-prefix list1 import

peer next-hop-local

Syntax
peer group-name next-hop-local
undo peer group-name next-hop-local
View
IPv4 multicast sub-address family view
Parameter
group-name: Name of the peer group.
Description
Use the peer next-hop-local command to remove the processing of the next hop
in routes which BGP will advertise to the peer group and set the local address as
the next hop.
Use the undo peer next-hop-local command to cancel the configuration.
Example
# Specify the local address as next-hop when advertising routes to peer group
named test.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] bgp 100