Databits; Display User-Interface - 3Com 8807 Command Reference Manual

Logging in to Switch Commands 45

databits

Syntax
databits { 7 | 8 }
undo databits
View
User interface view
Parameter
7: Sets 7 data bits.
8: Sets 8 data bits.
Description
Use the databits command to configure the data bits for the user interface.
Use the undo databits command to restore the default bits of the user interface.
This command can only be performed in Console and AUX user interface view.
By default, the value is 8.
Example
# Configure the data bits of AUX port to 7 bits.
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800] user-interface aux 0
[3Com-ui-aux0] databits 7

display user-interface

Syntax
display user-interface [ type number | number ] [ summary ]
View
Any view
Parameter
type: Specifies the type of a user interface.
number: Specifies the number of a user interface.
Summary: Displays the summary of a user interface.
Description
Use the display user-interface command to view the relational information of
the user interface. This command without the summary parameter displays user
interface type, absolute/relative index, transmission speed, priority, authentication
methods, and physical location. This command with the summary parameter
displays one user interface in use totally and user interface name etc.
Example
# Display the relational information of user interface 0.