Igmp-Snooping Max-Response-Time; Igmp-Snooping Nonflooding-Enable - 3Com 8807 Command Reference Manual

igmp-snooping
max-response-time
igmp-snooping
nonflooding-enable
This command is used to set the aging time of the multicast group member so
that the refresh frequency can be controlled. When the group members change
frequently, the aging time should be comparatively short, and vice versa.
Related command: igmp-snooping.
Example
# Set the aging time to 300 seconds.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] igmp-snooping host-aging-time 300
Syntax
igmp-snooping max-response-time seconds
undo igmp-snooping max-response-time
View
System view
Parameter
seconds: Maximum response time for a query, ranging from 1 to 25 seconds. By
default, it is 1 second.
Description
Use the igmp-snooping max-response-time command to configure the
maximum response time for a query.
Use the undo igmp-snooping max-response-time command to restore the
default value.
The set maximum response time decides the time limit for the switch to respond
to IGMP Snooping query packets.
Related command: igmp-snooping and igmp-snooping router-aging-time.
Example
# Set the maximum response time for the IGMP Snooping packet to 15s.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] igmp-snooping max-response-time 15
Syntax

igmp-snooping nonflooding-enable

undo igmp-snooping nonflooding-enable
View
System view
IGMP Snooping Configuration Commands 577