History-Command Max-Size - 3Com 8807 Command Reference Manual

Logging in to Switch Commands 51
<SW8800>
Option 2: Input in multiple lines
[SW8800] header shell % SHELL:
(After you press the <Enter> key, the system prompts the following message.)
Input banner text, and quit with the character '%'.
Go on inputting the rest text and end your input with the first letter:
Hello! Welcome %
(Press the <Enter> key)
[SW8800]
When you log in to the switch again, the following is displayed.
[SW8800] quit
<SW8800> quit
Please press ENTER
%SHELL:
(The character "%" is contained in the header.)
Hello! Welcome
<SW8800>
history-command Syntax
max-size
history-command max-size value
undo history-command max-size
View
User interface view
Parameter
value: Defines the size of the history buffer, ranging from 0 to 256. By default, the
size is 10, that is, 10 history commands can be saved.
Description
Use the history-command max-size command to configure the size of the
history command buffer.
Use the undo history-command max-size command to restore default size of
the history command buffer.
Example
# Set the history buffer to 20, namely saving 20 history commands.
<SW8800>system-view
System View: return to User View with Ctrl+Z.