Primary Authentication - 3Com 8807 Command Reference Manual

HWTACACS Configuration Commands 359
You are not allowed to assign the same IP address to both primary and secondary
accounting servers.
If you repeatedly use this command, the latest configuration overwrites the
previous one.
You can remove a TACACS scheme accounting server only when no Active TCP
connection used to send accounting packets is now using the server, and the
removal impacts only packets forwarded afterwards.
Example
# Configure a primary accounting server.
[SW8800] hwtacacs scheme test1
[3Com-hwtacacs-test1] primary accounting 10.163.155.12 49

primary authentication

Syntax
primary authentication ip-address [ port-number]
undo primary authentication
View
HWTACACS view
Parameter
ip-address: IP address of the server, a valid unicast address in dotted decimal
format.
port-number: Port number of the server, which is in the range 1 to 65535 and
defaults to 49.
Description
Use the primary authentication command to configure a primary TACACS
authentication server.
Use the undo primary authentication command to delete the configured
authentication server.
By default, the IP address of the TACACS authentication server is all zeros.
You are not allowed to assign the same IP address to both primary and secondary
authentication servers.
If you repeatedly use this command, the latest configuration overwrites the
previous one.
You can remove a TACACS scheme authentication server only when no Active TCP
connection used to send authentication packets uses the server., and the removal
impacts only packets forwarded afterwards.
Related command: display hwtacacs.