Display Saved-Configuration - 3Com Switch 4500 Family Manual

Examples
# Display the VLAN configuration information of the current switch.
<Sysname> display current-configuration vlan
#
vlan 1
#
vlan 5 to 69
#
vlan 70
description Vlan 70
#
vlan 71 to 100
#
return

display saved-configuration

Syntax
display saved-configuration [ unit unit-id ] [ by-linenum ]
View
Any view
Parameters
unit unit-id: Specifies the unit ID of a switch. With this keyword-argument combination specified, this
command can display the initial configuration file of the specified unit.
by-linenum: Displays configuration information with line numbers.
Description
Use the display saved-configuration command to display the initial configuration file of a switch.
Note that:
If the switch starts up without a configuration file, the system will display that no configuration file
exists upon execution of the command.
If you have saved configuration after the switch starts up, the command displays the last saved
configuration.
Related commands: save, reset saved-configuration, display current-configuration.
Examples
# Display the initial configuration file of the current switch.
<Sysname> display saved-configuration
#
sysname sysname
#
password-control login-attempt 3 exceed lock-time 120
#
radius scheme system
1-6