Debugging Ospf - 3Com 8807 Command Reference Manual

416 C 25: OSPF C C
HAPTER ONFIGURATION OMMANDS
the ospf authentication-mode md5 command to configure the MD5 cipher text
authentication key if the area is configured to support MD5 cipher text
authentication mode.
Related command: ospf authentication-mode.
Example
# Enter area 0 view.
[3Com-ospf-1] area 0
# Specify the OSPF area 0 to support MD5 cipher text authentication:
[3Com-ospf-1-area-0.0.0.0] authentication-mode md5

debugging ospf

Syntax
debugging ospf [ process-id ] { event | packet [ ack | dd | hello | interface
interface-type interface-number | request | update ] | lsa-originate | spf |
graceful-restart }
undo debugging ospf [ process-id ] { event | packet [ ack | dd | hello |
interface interface-type interface-number | request | update ] | lsa-originate |
spf | graceful-restart }
View
User view
Parameter
process-id: Process ID of OSPF. The command enables/disables all process
debugging if you do not specify a process ID.
event: Enables/Disables OSPF event debugging.
packet: Enables/Disables OSPF packet debugging. OSPF packets include:
ack: LSAck packet.
dd: Database Description packet.
hello: Hello packet.
request: Link State Request packet.
update: Link State Update packet.
interface interface-type interface-number: Interface type and number, which
indicates to enable/disable debugging for the OSPF packets obtained on the
specified interface.
lsa-originate: Enables/Disables OSPF LSA packet debugging.
spf: Enables/Disables OSPF minimum tree calculation debugging.
graceful-restart: Enables the debugging for OSPF GR.