Display Counters; Description - 3Com 8807 Command Reference Manual

Ethernet Port Configuration Commands 131

description

Syntax
description text
undo description
View
Ethernet port view
Parameter
text: Port description character string, with 64 characters at most.
Description
Use the description command to configure the description character string for
Ethernet port.
Use the undo description command to cancel the port description character
string.
By default, the port description character string is null.
Example
# Configure the description character string of Ethernet port Ethernet2/1/1 as
lanswitch-interface.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] interface Ethernet 2/1/1
[3Com-Ethernet2/1/1] description lanswitch-interface

display counters

Syntax
display counters [ rate ] { inbound | outbound } interface [ interface-type ]
View
Any view
Parameter
rate: Displays the rate information of the ports in the Up state during the latest
sampling period. If this keyword is not specified in the command, the system
displays packet counts.
inbound: Displays the import statistic information.
outbound: Displays the export statistic information.
interface-type: Specifies the port type; either Ethernet or Gigabit Ethernet.
Description
Use the display counters command to view the statistics on the ports of the
specified types. If the port type is not specified, the system displays statistics
orderly on all the ports.