Port-Group; Priority - 3Com 8807 Command Reference Manual

QoS Commands 255

port-group

Syntax
port-group index
undo port-group index
View
System view
Parameter
index: Port group number.
Description
Use the port-group command to create a port group and enter port group view.
Use the undo port-group index command to delete a port group. The port group
number of a common interface card ranges from 1 to 128.
c
CAUTION: The special port group corresponding to the XP4 card port cannot be
deleted.
Example
# Create port group 1 and enter port group view.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] port-group 1
[3Com-port-group1]

priority

Syntax
In Ethernet port view:
priority priority-level
undo priority
In Ethernet port view:
priority { priority-level | trust }
undo priority
View
Ethernet port view, port group view
Parameter
priority-level: Port priority value, in the range of 0 to 7. By default, it is 0.
Trust: Trusts the local priority in the input packet all the time.
Description
Use the priority command to set the default local precedence value for a port.
Use the undo priority command to restore the default value of local precedence.