Name; Password - 3Com 8807 Command Reference Manual

AAA Configuration Commands 321
Use the undo local-user password-display-mode command to cancel the
password display mode that has been set for all the accessing users.
If cipher-force has been adopted, the user efforts of specifying to display
passwords in simple text will render useless.
The default password display mode for all the access users is auto.
Related command: display local-user , password.
Example
# Force all the accessing users to display passwords in cipher text.
[SW8800] local-user password-display-mode cipher-force

name

Syntax
name string
undo name
View
VLAN view
Parameter
string: Name of the delivered VLAN. The name can contain up to 32 characters.
Description
Use the name command to configure the name of a delivered VLAN.
Use the undo name command to remove the name configured for a delivered
VLAN.
By default, a delivered VLAN has no name.
The name command works with the function of dynamic VLAN delivering. For
information about dynamic VLAN delivering, refer to the vlan-assignment-mode
command.
Related command: dot1x guest-vlan, vlan-assignment-mode.
Example
# Set the name of VLAN 100 to test.
[SW8800] vlan 100
[3Com-vlan100] name test

password

Syntax
password { simple | cipher } password
undo password
View
Local user view