Display Bgp Routing-Table Different-Origin-As; Display Bgp Routing-Table Flap-Info - 3Com 8807 Command Reference Manual

display bgp
routing-table
different-origin-as
display bgp
routing-table flap-info
Table 76 Description of the fields of the display bgp routing-table dampened command
Field
Origin attribute of route, which indicates that the route updates its origin
relative to the route originating it from AS. It has three optional values:
IGP
Origin
EGP
INC
AS-path attribute of route, which records all AS areas that the route passes.
As-path
With it, route loop can be avoided
Syntax

display bgp routing-table different-origin-as

View
Any view
Parameter
None
Description
Use the display bgp routing-table different-origin-as command to view routes
that have different source autonomous systems
Example
# View the routes that have different source ASs.
<SW8800> display bgp routing-table different-origin-as
Flags: # - valid,
D - damped,
I - internal,
B - balance
Destination/Mask Pref
------------------------------------------------------------------
10.10.10.0/24 0
10.10.10.0/24 256
For detailed description of the output information, see Table 74.
Syntax
display bgp routing-table flap-info [ regular-expression as-regular-expression
| as-path-acl acl-number | network-address [ mask [ longer-match ] ] ]
View
Any view
Parameter
as-regular-expression: The route flap-info matching AS path regular expression.
Description
The route belongs to inside of AS. BGP treats aggregate route and
the route defined by the command network as inside of AS, and
origin type as IGP.
The route is learned from exterior gateway protocol (EGP).
Short for INCOMPLETE: indicates that the original source of the
route information is unknown (learned by other methods). BGP sets
the origin of the route imported through other IGP protocols as
INCOMPLETE
^ - best,
H - history,
S - aggregate suppressed
Next-hop Med
10.10.10.2 0
10.10.10.1 0
BGP Configuration Commands
Local-Pref Origin
IGP
IGP 200
515
As-Path