acfp enable
Syntax
View
Parameters
Description
Examples
display acfp client-info
Syntax
View
Parameters
5 ACFP Configuration
Commands
acfp enable
undo acfp enable
System view
None
Use the acfp enable command to enable ACFP.
Use the undo acfp enable command to disable ACFP.
By default, ACFP is disabled.
# Enable ACFP.
<SW5500G> system-view
System View: return to User View with Ctrl+Z.
[SW5500G] acfp enable
display acfp client-info [ client-id ]
Any view
client-id: Displays information about the specified ACFP client, where
client-id is the ACFP client identifier, in the range of 1 to 2147483647.