Display Ospf Retrans-Queue - 3Com 8807 Command Reference Manual

Description
Use the display ospf request-queue command to view the information about
the OSPF request-queue.
Example
# Display the information of OSPF request-queue.
<SW8800> display ospf request-queue
The Router's Neighbors is
RouterID:
Interface: 1.1.1.3
LSID:1.1.1.3
Table 64 Description of the fields of the display ospf request-queue command
Field
RouterID
Address
Interface
Area
LSID:1.1.1.3
AdvRouter
Sequence
Age
display ospf Syntax
retrans-queue
display ospf [ process-id ] retrans-queue
View
Any view
Parameter
process-id: ID of an OSPF process. The command is applied to all current OSPF
processes if you do not specify a process ID.
Description
Use the display ospf retrans-queue command to view information about the
OSPF retransmission queue.
Example
# Display information about the OSPF retransmission queue.
<SW8800> display ospf retrans-queue
OSPF Process 200 with Router ID 103.160.1.1
Retransmit List
RouterID: 162.162.162.162 Address: 103.169.2.2
Interface: 103.169.2.5
1.1.1.1
AdvRouter:1.1.1.3
Description
Router ID of neighbor router
Address of the interface, through which neighbor routers communicate with
the router
Address of the interface on the network segment
Number of an OSPF area
Link State ID of the LSA
Router ID of the router originating the LSA
Sequence number of the LSA, used to discover old and repeated LSAs
Age in seconds of the LSA
The Router's Neighbors is
Retrans list:
Type: ASE LSID:129.11.77.0
Type: ASE LSID:129.11.108.0
OSPF Configuration Commands
Address: 1.1.1.1
Area: 0.0.0.0
Sequence:80000017
Area: 0.0.0.1
AdvRouter:103.160.1.1
AdvRouter:103.160.1.1
433
Age:35