Reset Lacp Statistics - 3Com 8807 Command Reference Manual

Ethernet Link Aggregation Configuration Commands 159
View
Ethernet port view
Parameter
agg-id: Aggregation group ID, in the range of 1 to 920. IDs 1 though 31 indicate
manual or static aggregation groups; IDs 32 through 64 are reserved; IDs 65
though 192 indicate Routed Trunks; IDs 193 through 920 indicate dynamic
aggregation groups.
Description
Use the port link-aggregation group command to add an Ethernet port into a
manual or static aggregation group. Use the undo port link-aggregation group
command to delete an Ethernet port from an aggregation group.
Related command: display link-aggregation verbose.
When a port is added into an aggregation group, the original ARP information of
the port will be lost.
Example
# Add Ethernet2/1/1 into aggregation group 22.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] interface Ethernet2/1/1
[3Com-Ethernet2/1/1] port link-aggregation group 22

reset lacp statistics

Syntax
reset lacp statistics [ interface interface-type interface-number [ to
interface-type interface-number ] ]
View
System view
Parameter
interface interface-type interface-number [ to interface-type interface-number ]:
Specifies a port or ports. The command without the parameter to specifies one
port, while the command with the parameter to specifies several contiguous
ports. interface-type indicates port type. interface-number indicates port number.
For more information, refer to the parameter description of the interface
command.
Description
Use the reset lacp statistics command to clear LACP statistics for the port. If you
do not specify a port, the command clears LACP statistics for all the ports.
Related command: display link-aggregation interface.
Example
# Clear LACP statistics for all Ethernet ports.
<SW8800> reset lacp statistics