Display Pim Routing-Table - 3Com 8807 Command Reference Manual

Parameter
interface interface-type interface-number: Interface type and interface number,
used to specify the interface.
Description
Use the display pim neighbor command to view the PIM neighbor information
discovered by the switch interface. If the interface type and interface number are
specified, this command only displays the PIM neighbor information on the
specified interface.
Example
# Display PIM neighbor information discovered by the switch interface.
<SW8800> display pim neighbor
Neighbor's Address
90.0.0.2
Table 89 Description on the fields of display pim neighbor command
Field
Neighbor
Address
Interface
Uptime
Expires
display pim Syntax
routing-table
display pim routing-table [ { { *g [ group-address [ mask { mask-length | mask }
] ] | **rp [ rp-address [ mask { mask-length | mask } ] ] } | { group-address [ mask {
mask-length | mask } ] | source-address [ mask { mask-length | mask } ] } * } |
incoming-interface { interface interface-type interface-number | null } | {
dense-mode | sparse-mode } ] *
View
Any view
Parameter
*g: (*, G) route entry.
mask: IP address mask.
mask-length: Length of the IP address mask.
**rp: (*, *, p) route entry.
rp-address: Address of the RP.
group-address: Address of the multicast group.
source-address: IP address of the multicast source.
incoming-interface interface interface-type interface-number: Route entry with
the specified incoming interface.
Interface Name
Vlan-interface90
Description
Neighbor address
Interface where the neighbor has been discovered
Time passed since the multicast group has been discovered
Specifies when the member will be removed from the group
PIM Configuration Commands
Uptime
00:00:36
625
Expires
00:01:40