Display Local-User - 3Com 8807 Command Reference Manual

314 C 21: AAA
HAPTER AND

display local-user

RADIUS/HWTACACS P
ROTOCOL
View
Any view
Parameter
isp-name: Specifies the ISP domain name, with a character string not exceeding 24
characters. The specified ISP domain shall have been created.
Description
Use the display domain command to view the configuration of a specified ISP
domain or display the summary information of all ISP domains.
By default, this command displays the summary information about all the ISP
domains in the system.
This command is used to output the configuration of a specified ISP domain or
display the summary information of all ISP domains. If an ISP domain is specified,
the configuration information will be displayed exactly the same, concerning the
content and format, as the displayed information of the display domain
command. The output information can help with ISP domain diagnosis and
troubleshooting.
Related command: access-limit, domain, radius scheme, user-template,
state, display domain.
Example
# Display the summary information of all ISP domains of the system.
<SW8800> display domain
0 Domain = system
State = Active
Scheme = LOCAL
Vlan-assignment-mode = Integer
Domain User Template:
Idle-cut = Disable
Self-service = Disable
Default Domain Name: system
Total 1 domain(s).1 listed.
Syntax
display local-user [ domain isp-name | idle-cut { enable | disable } |
service-type { ftp | lan-access | ppp | ssh | telnet | terminal } | state { active |
block } | user-name user-name | vlan vlanid ]
View
Any view
Parameter
domain isp-name: Configures to display all the local users in the specified ISP
domain. isp-name specifies the ISP domain name with a character string not
exceeding 24 characters. The specified ISP domain shall have been created.
idle-cut: Configures to display the local users according to the state of idle-cut
function. disable means that the user disables the idle-cut function and enable
C C
ONFIGURATION OMMANDS
Access-limit = Disable