Lock; Modem - 3Com 8807 Command Reference Manual

Logging in to Switch Commands 53
By default, the value is English.
Example
# Switch from English mode to Chinese mode.
<SW8800> language-mode chinese

lock

Syntax
lock
View
User view
Parameter
None
Description
Use the lock command to lock the user interface to prevent unauthorized user
from operating it.
Example
# Lock the current user interface.
<SW8800> lock
Password: xxxx
Again: xxxx

modem

Syntax
modem [ call-in | both ]
undo modem [ call-in | both ]
View
User interface view
Parameter
call-in: Configures to allow call-in.
both: Configures to allow call-in and call-out.
Description
Use the modem command to configure the call-in and call-out attributes of the
Modem. Use the undo modem command to cancel the configuration of Modem
call-in and call-out attributes.
The modem command without parameters is used to allow call-in and call-out.
The undo modem command without parameters is used to ban call-in and
call-out.
This command can only be performed in AUX user interface view.