3Com 8807 Command Reference Manual page 391

View
Any view
Parameter
inactive: With the parameter, this command displays the inactive route
information. Without the parameter, this command displays the active and
inactive route information.
verbose: With the verbose keyword, this command displays the verbose route
information. Without the parameter, this command displays the route summary.
protocol: The parameter has multiple selectable values:
direct: Displays direct connection route information
■
static: Displays the static route information.
■
bgp: Displays BGP route information.
■
isis: Displays IS-IS route information.
■
ospf: Displays OSPF route information.
■
ospf-ase: Displays OSPF ASE route information.
■
ospf-nssa: Displays OSPF NSSA route information.
■
rip: Displays RIP route information.
■
vpn-instance-name: Indicates a VPN instance name.
Description
Use the display ip routing-table protocol command to view the route
information of specified protocol.
Example
# Display all direct connection routes summary.
<SW8800> display ip routing-table protocol direct
DIRECT Routing tables:
Summary count: 4
DIRECT Routing tables status:<active>:
Summary count: 3
Destination/Mask
20.1.1.1/32 DIRECT
127.0.0.0/8 DIRECT
127.0.0.1/32
DIRECT Routing tables status:<inactive>:
Summary count: 1
Destination/Mask
210.0.0.1/32
# View the static routing table.
<SW8800> display ip routing-table protocol static
STATIC Routing tables:
Summary count: 1
STATIC Routing tables status:<active>:
Summary count: 0
STATIC Routing tables status:<inactive>:
Summary count: 1
Destination/Mask Protocol
1.2.3.0/24 STATIC
Display Commands of the Routing Table
Protocol Pre Cost
0 0
0 0
DIRECT 0 0
Protocol Pre Cost
DIRECT 0 0
Pre Cost Nexthop
60 0 1.2.4.5
Nexthop Interface
127.0.0.1 InLoopBack0
127.0.0.1 InLoopBack0
127.0.0.1 InLoopBack0
Nexthop Interface
127.0.0.1 InLoopBack0
Interface
Vlan-interface10
389