Display Vlan-Ip Interface - 3Com 8807 Command Reference Manual

88 C 4: VLAN C
HAPTER

display vlan-ip interface

C
ONFIGURATION OMMANDS
Description
Use the display vlan-ip vlan command to display the information and index of
the IP subnet-based VLAN configured on the specified VLAN. You can refer to this
command for using an IP subnet-based VLAN and adding/deleting an IP
subnet-based VLAN.
Related command: display vlan-ip interface
Example
# Display the information and indexes of IP subnet-based VLANs configured on
VLAN 10 and VLAN 11.
<SW8800> display vlan-ip vlan 10 to 11
VLAN ID: 10
VLAN Type: IP-based VLAN
Index
0
1
2
3
4
5
6
7
VLAN ID: 11
VLAN Type: IP-based VLAN
Index
0
1
2
3
4
5
6
7
Syntax
display vlan-ip interface { interface-list | all }
View
Any view
Parameter
interface-list: Displays the protocol information of the IP subnet-based VLAN on
the specified port, in the form of interface-list = { interface-type interface-number
[ to interface-type interface-number ] }. interface-type indicates a port type and
interface-number indicates a port number. The port number after the keyword to
must be greater than or equal to that before to.
all: Displays the protocol information of the IP subnet-based VLANs on all the
ports.
Type Value
IPv4
IPv4
IPv4
IPv4
IPv4
IPv4
IPv4
IPv4
Type Value
IPv4
IPv4
IPv4
IPv4
IPv4
IPv4
IPv4
IPv4
1.2.3.0 255.255.255.0
1.2.4.0 255.255.255.0
1.2.5.0 255.255.255.0
1.2.6.0 255.255.255.0
1.2.7.0 255.255.255.0
1.2.8.0 255.255.255.0
1.2.9.0 255.255.255.0
1.2.10.0 255.255.255.0
2.2.7.0 255.255.255.0
2.2.8.0 255.255.255.0
2.2.9.0 255.255.255.0
2.2.10.0 255.255.255.0
2.2.3.0 255.255.255.0
2.2.4.0 255.255.255.0
2.2.5.0 255.255.255.0
2.2.6.0 255.255.255.0