Debugging Mpls L2Vpn; Display Ccc - 3Com 8807 Command Reference Manual

762 C 41: MPLS VLL C C
HAPTER ONFIGURATION OMMANDS
Example
# Create a remote CCC connection, with the name of clink, the transmitting LSP
of tlsp, and the receiving LSP of rlsp.
[SW8800] ccc clink interface vlan-interface 201 transmit-lsp tlsp
receive-lsp rlsp
# Create a local CCC connection, with the name of clink, and the interfaces
connecting to the two CEs being the interfaces of VLAN 201 and VLAN 301
respectively.
[SW8800] ccc clink interface vlan-interface 201 out-interface
interface vlan-interface 301

debugging mpls l2vpn

Syntax
debugging mpls l2vpn { all | advertisement | error | event | connections [
interface vlan-interface vlan-id ] }
undo debugging mpls l2vpn { all | advertisement | error | event |
connections [ interface vlan-interface vlan-id ] }
View
User view
Parameter
all: Enables/Disables all types of L2VPN Debugging.
advertisement: Enables/Disables Debugging for L2VPN BGP/LDP advertisement
messages.
error: Enables/Disables Debugging for L2VPN error messages.
event: Enables/Disables Debugging for L2VPN event messages.
connections: Enables/Disables Debugging for connection messages.
vlan-id: ID of the VLAN whose interface is used to establish the connection.
Description
Use the debugging mpls l2vpn command to enable specific type of L2VPN
debugging.
Use the undo debugging mpls l2vpn command to disable specific type of
L2VPN debugging.
Example
# Enable all types of L2VPN Debugging.
<SW8800> debugging mpls l2vpn all

display ccc

Syntax
display ccc [ ccc-name | type [ local | remote ] ]