Cache-Sa-Enable; Debugging Msdp - 3Com 8807 Command Reference Manual

37
MSDP Configuration
Commands

cache-sa-enable

debugging msdp

MSDP C
n
An Ethernet switch functions as a router when it supports the layer 3 protocols. A
router that is referred to in the following represents a generalized router or a layer
3 Ethernet switch running related protocols.
Syntax
cache-sa-enable
undo cache-sa-enable
View
MSDP view
Parameter
None
Description
Use the cache-sa-enable command to enable the router to cache SA state.
Use the undo cache-sa-enable command to remove the cache from the router.
By default, the router caches the SA state, i.e., (S, G) entry after it receives SA
messages.
If the router is in cache state, it will not send SA request message to the specified
MSDP peer when it receives a new group join message.
Example
# Configure the router to cache all the SA states.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] msdp
[3Com-msdp] cache-sa-enable
Syntax
debugging msdp { all | connect | event | packet | source-active }
undo debugging msdp { all | connect | event | packet | source-active }
ONFIGURATION
C
OMMANDS