Ip Netstream Export Version; Ip Netstream Timeout Active - 3Com 8807 Command Reference Manual

Netstream Configuration Commands 875
<SW8800> system-view
[SW8800] ip netstream export source 192.168.1.5
ip netstream export Syntax
version
ip netstream export version versionNo [ origin-as | peer-as ]
undo ip netstream export version
View
System view
Parameter
versionNo: Version number of the Netstream statistics export packets. Version 5
and version 9 are currently supported.
n
To use version 8, use the following command: ip netstream aggregation. See the
section entitled "ip netstream aggregation"
origin-as: Uses the original AS number as the AS number of the specified IP
address.
peer-as: Uses the peer AS number as the AS number of the specified IP address.
Description
Use the ip netstream export version command to configure the version number
and AS options of the Netstream statistics export packet.
Use the undo ip netstream export version command to restore the default
setting.
By default, the AS option is peer-as, the version number of MPLS packets is 9, the
version number of aggregation statistics packets is 8, and the version number of
other packets is 5.
Example
# Set the version number of Netstream statistics export packets to 5 and use the
original AS number as the AS number of the specified IP address.
<SW8800> system-view
[SW8800] ip netstream export version 5 origin-as
ip netstream timeout Syntax
active
ip netstream timeout active minutes
undo ip netstream timeout active
View
System view
Parameter
minutes: Active aging time of Netstream in minutes.