3Com 8807 Command Reference Manual page 880

878 C 49: N C C
HAPTER ETSTREAM ONFIGURATION OMMANDS
View
System view
Parameter
minutes: Aging time of the template in minutes.
Description
Use the ip stream template timeout command to set the aging time of the
template.
Use the undo ip stream template timeout command to restore the aging time
of the template to the default value.
By default, the aging time of the template is 30 minutes.
Example
# Set the aging time of the template to 60 minutes.
<SW8800> system-view
[SW8800] ip netstream template timeout 60