Display Ospf Nexthop - 3Com 8807 Command Reference Manual

display ospf nexthop

Tos 0 metric: 1
E type :
Forwarding Address: 0.0.0.0
Tag: 1
Table 61 Description of the fields of the display ospf lsdb ase command
Field
type
ls id
adv rtr
ls age
len
seq#
chksum
Options
Net mask
E type
Forwarding Address
Tag
Syntax
display ospf [ process-id ] nexthop
View
Any view
Parameter
process-id: Process ID of OSPF. The command is applied to all current OSPF
processes if you do not specify a process ID.
Description
Use the display ospf nexthop command to view the information about the
next-hop.
Example
# Display the OSPF next-hop information.
<SW8800> display ospf nexthop
OSPF Process 1 with Router ID 1.1.1.1
Address Type
---------------------------------------------------------------------
202.38.160.1 Direct
202.38.160.2 Neighbor
Table 62 Description of the fields of the display ospf nexthop command
Field Description
Address Address of next hop
Type Type of next hop
Refcount Reference count of the next hop, i.e., number of routes using this address as the
next hop
Intf Addr IP address of the outgoing interface to the next hop
2
Description
Type of the LSA
Link state ID of the LSA
Router ID of the router originating the LSA
Age of the LSA in seconds
Length of the LSA
Sequence number of the LSA
Checksum of the LSA
Options of the LSA
Network mask
Type of external route
Forwarding address
Tag
Refcount Intf Addr
3 202.38.160.1
1 202.38.160.1
OSPF Configuration Commands
Intf Name
Vlan-interface2
Vlan-interface2
431