Display Igmp-Snooping Statistics - 3Com 8807 Command Reference Manual

display igmp-snooping
statistics
IP multicast group address, member ports in the IP multicast group, MAC multicast
group, MAC multicast group address, and the member ports in the MAC multicast
group.
Example
# Display the multicast group information about VLAN2.
<SW8800> display igmp-snooping group vlan 2
***************Multicast group table***************
Vlan(id):2.
Router port(s):Ethernet3/1/1
IP group(s):the following ip group(s) match to one mac group.
IP group address:230.45.45.1
Member port(s):Ethernet3/1/12
MAC group(s):
MAC group address:01-00-5e-2d-2d-01
Member port(s):Ethernet3/1/12
We can know from the information listed above that:
There is a multicast group in VLAN 2;
■
The router port is Ethernet 2/1/1;
■
The IP multicast group address is 230.45.45.1;
■
The member port of the IP multicast group is Ethernet 2/1/2;
■
MAC multicast group is 0100-5e2d-2d01;
■
The member of the MAC multicast group is Ethernet 2/1/2.
■
Syntax

display igmp-snooping statistics

View
Any view
Parameter
None
Description
Use the display igmp-snooping statistics command to view the statistics
information on IGMP Snooping.
This command displays the information such as the number of received general
IGMP query packets, received IGMP group-specific query packets, received IGMP
v1 packets, received IGMP v2 packets, received IGMP leave packets and error
packets, and sent IGMP group-specific query packets.
Related command: igmp-snooping.
Example
# Display statistics information about IGMP Snooping.
<SW8800> display igmp-snooping statistics
Received IGMP general query packet(s) number:1.
IGMP Snooping Configuration Commands 571