3Com 8807 Command Reference Manual page 155

8800 series
Hide thumbs Also See for 8807:
Table of Contents

Advertisement

View
Any view
Parameter
agg-id: Aggregation group ID, which must be existing ones, in the range of 1 to
920. IDs 1 through 31 indicate manual or static aggregation groups; IDs 32
through 64 are reserved; IDs 65 through 192 are Routed Trunks; IDs 193 through
920 indicate dynamic aggregation groups.
Description
Use the display link-aggregation verbose command to view detailed
information of a designated port, including aggregation group ID, aggregation
group type, load sharing type, aggregation group description and detailed local
information (system ID, member ports, port status, port priority, flag, operation
key, link status) and detailed remote information (local port, indexes of remote
ports, port priority, flag, operation key and system ID, here local and remote are in
a relative sense).
Note that since the manual aggregation group cannot get the information of the
peer end, every item of the peer end is displayed as 0, which does not indicate the
actual status of the peer system.
Example
# Display the detailed information of aggregation group 5.
<SW8800>display link-aggregation verbose 5
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Aggregation ID: 5, AggregationType: Manual,
Aggregation Description:
System ID: 0x0, 00e0-fc00-1312
Port Status: S -- Selected,
Local:
Port
--------------------------------------------------------------------
------------
Ethernet9/1/9
Ethernet9/1/10
Remote:
Actor
--------------------------------------------------------------------
------------
Ethernet9/1/9
Ethernet9/1/10
Table 22 Description on the fields of the display link-aggregation verbose command
Field
Aggregation ID
Aggregation Type
Loadsharing Type
Aggregation Description
System ID
Ethernet Link Aggregation Configuration Commands
T -- sTandby,
Status
Priority Flag Oper-Key Link-Status
S
32768
S
32768
Partner Priority Flag Oper-Key SystemID
0
0
0x00 0
0
0
0x00 0
Description
Aggregation group ID
Aggregation group type, which can be dynamic, static and
manual
Load sharing type
Aggregation group description
Local device ID
Loadsharing Type: Shar
U -- Unselected
0x00 8
Down
0x00 8
Down
0x0,0000-0000-0000
0x0,0000-0000-0000
153

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

88148810

Table of Contents