Default-Route-Advertise - 3Com 8807 Command Reference Manual

464 C 26: I
HAPTER NTEGRATED

default-route-advertise

IS-IS C C
ONFIGURATION OMMANDS
interface-information: Information about IS-IS enabled data link layer.
memory-allocating: IS-IS memory allocating status.
receiving-packet-content: Packets received through IS-IS protocol.
restart-events: IS-IS restart events.
self-originate-update: Packets locally updated through IS-IS protocol.
sending-packet-content: Packets sent through IS-IS protocol.
snp-packet: CSNP/PSNP packet of IS-IS.
spf-event: IS-IS SPF events.
spf-summary: Statistics about IS-IS performing SPF calculation.
spf-timer: IS-IS SPF trigger events.
task-error: IS-IS events status.
timer: IS-IS timer.
update-packet: Updated packets through IS-IS protocol.
Description
Use the debugging isis command to enable IS-IS debugging.
Use the undo debugging isis command to disable the function.
Example
# Enable all the information debugging of IS-IS.
<SW8800> debugging isis all
Syntax
default-route-advertise [ route-policy route-policy-name ]
undo default-route-advertise [ route-policy route-policy-name ]
View
IS-IS view
Parameter
route-policy-name: Name of a route-policy.
Description
Use the default-route-advertise command to create the default route of L1, L2
router. Use the undo default-route-advertise command to cancel this
configuration.
By default, this command uses the L2 router to create the default route. There is
another mechanism for L1 routers. Namely, the system discovers the default route