Debugging Mpls L2Vpn; Description - 3Com 8807 Command Reference Manual

VPLS Configuration Commands 775
You can also customize the mapping relationship between user priority and PSN
COS and directly specify the COS for user data transmitted over PSN for each of
the user priorities 0 to 7 by configuring p-p-p-p-p-p-p-p.
Example
# Set the COS of VSI 3Com to 8.
<SW8800> system-view
[SW8800] vsi 3com static
[3Com-vsi-3com] cos 8

description

Syntax
description text
undo description
View
VSI view
Parameter
text: Description text for the VSI, an alphanumeric character string of up to 80
characters.
Description
Use the description command to set the description of current VSI.
Use the undo description command to remove the description.
Example
# Set the description of VSI 3Com to 3Com Corporation Co., Ltd.
<SW8800> system-view
[SW8800] vsi 3Com static
[3Com-vsi-3Com] description 3Com Corporation Co., Ltd.

debugging mpls l2vpn

Syntax
debugging mpls l2vpn { advertisement | all | connections | error | event |
loadshare }
undo debugging mpls l2vpn { advertisement | all | connections | error |
event | loadshare }
View
User view
Parameter
advertisement: Enables debugging for L2VPN signaling protocol.
all: Enables all types of debugging concerning L2VPN module.
connections: Enables debugging for MPLS layer 2 VC connections.
error: Enables debugging for L2VPN errors.