State; Vlan-Assignment-Mode - 3Com 8807 Command Reference Manual

326 C 21: AAA RADIUS/HWTACACS P C C
HAPTER AND ROTOCOL ONFIGURATION OMMANDS
Use the undo service-type command to cancel the specified service type for the
user.
Example
# Set to provide the Lan-access service for the user 3com1.
[3Com-luser-3com1] service-type lan-access

state

Syntax
state { active | block }
View
ISP domain view, Local user view
Parameter
active: Configures the current ISP domain (ISP domain view)/current user (local
user view) as being in active state, that is, the system allows the users in the
domain (ISP domain view) or the current user (local user view) to request network
service.
block: Configures the current ISP domain (ISP domain view)/current user (local
user view) as being in block state, that is, the system does not allow the users in
the domain (ISP domain view) or the current user (local user view) to request
network service.
Description
Use the state command to configure the state of the current ISP domain/ current
user.
By default, after an ISP domain is created, it is in the active state (in ISP domain
view).
A local user will be active (in local user view) upon its creation.
In ISP domain view, every ISP can either be in Active or Block state. If an ISP
domain is configured to be Active, the users in it can request for network service,
while in Block state, its users cannot request for any network service, which will
not affect the users currently online.
Related command: domain.
Example
# Set the current ISP domain 3com163.net to be in the block state. The
supplicants in this domain cannot request for the network service.
[3Com-isp-3com163.net] state block
# Set the user 3com1 to be in the block state.
[3Com-luser-3com1] state block

vlan-assignment-mode

Syntax
vlan-assignment-mode { integer | string }