Sftp Server Enable; Ssh Service-Type Default - 3Com 8807 Command Reference Manual

960 C 56: SSH T
HAPTER
SFTP Server
Configuration
Commands

sftp server enable

ssh service-type default

S C
ERMINAL ERVICE ONFIGURATION
The command is as follows:
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] ssh2 10.214.50.51 prefer_kex dh_exchange_group prefer_ctos_
cipher 3des prefer_ctos_hmac md5
Syntax
sftp server enable
undo sftp server
View
System view
Parameter
None
Description
Use the sftp server enable command to start the SFTP server.
Use the undo sftp server enable command to shutdown the SFTP server.
By default, the SFTP server is shutdown.
Example
# Start the SFTP server.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] sftp server enable
# Shutdown the SFTP server.
[SW8800] undo sftp server
Syntax
ssh service-type default { all [sftp-directory directory ] | sftp [ sftp-directory
directory ] | stelnet }
undo ssh service-type default
View
System view
Parameter
all: Specifies that the default service type can be either Stelnet or SFTP.
C
OMMANDS