Display Acl Running-Packet-Filter; Display Flow-Temlate - 3Com 8807 Command Reference Manual

218 C 16: ACL C
HAPTER OMMANDS
display acl
running-packet-filter

display flow-temlate

Syntax
display acl running-packet-filter { all | interface interface-type interface-
number | vlan vlan-id }
View
Any view
Parameter
all: Displays all the ACLs that have been applied (including the number-identified
ones and name-identified ones)
interface interface-type interface-number: The port of the switch. Refer to the
description in the Port Module Command Manual for details. The ACL application
information on the specified port of a normal card displays when the parameter is
specified.
vlan: Displays the ACL application information under the VLAN configured
through the service process card.
vlan-id: the ID of the VLAN, in the range of 1-4094.
Description
Use the display acl running-packet-filter command to display the ACL
application information, including the name of the ACL, the name of the sub
items and the application state.
Example
# Display the ACL application information of port Ethernet3/1/1.
<SW8800> display acl running-packet-filter ethernet3/1/1
Ethernet3/1/1
Inbound:
Acl 4000 rule 0 running
# Display the ACL application information of VLAN2
<SW8800> display acl running-packet-filter vlan 2
Vlan 2
Inbound:
Acl 2000 rule 1 slot 6
Syntax
display flow-template [ default | interface interface-type interface-number |
slot slotid | user-defined ]
View
Any view
Parameter
default: Displays the default flow template of the system.
interface interface-type interface-number: Displays the flow template applied on
the specified port.
running