Display Stp Tc - 3Com 8807 Command Reference Manual

MST region configuration information includes: region name, region revision level,
and associations between VLANs and MSTIs. All these configurations together
determine to which MST region a switch belongs.
Related command: stp region-configuration.
Example
# Display the MST region configuration information.
<SW8800> display stp region-configuration
Oper Configuration
Format selector :0
Region name
Revision level
Instance
Table 27 Description on the fields of the display stp region-configuration command
Field
Format selector
Region name
Revision level
Instance Vlans Mapped

display stp tc

Syntax
display stp [ instance instanceid ] tc { all | detected | received | sent }
View
Any view
Parameter
instance instanceid: Instance to be displayed. By default, TC (Topology Change)
statistics of all the instances will be displayed.
detected: TC statistics detected by the bridge.
received: TC statistics received at the bridge.
sent: TC statistics sent from the bridge.
all: All TC statistics, including those detected, received and sent by the bridge.
Description
Use the display stp tc command to view TC (transaction capabilities) statistics.
Example
# Display all TC statistics.
<SW8800> dis stp tc all
---------- Stp Instance 0 tc or tcn received count ----------
:3com
:0
Vlans Mapped
0 21 to 4094
1 1 to 10
2 11 to 20
MSTP Configuration Commands
Description
Selector defined by MSTP
Region name of MST region
Revision level of MST region
VLAN mapping table of MST region
175