Display Snmp-Agent Mib-View - 3Com 8807 Command Reference Manual

display snmp-agent
mib-view
Table 125 Description on the fields of the display snmp-agent group command
Field Description
Security model The security mode adopted by SNMP
readview Read-only MIB view name corresponding to that group
writeview Writable MIB view corresponding to that group
notifyview The name of the notify MIB view corresponding to that group
storage-type Storage mode
Syntax
display snmp-agent mib-view [ exclude | include | { viewname mib-view } ]
View
Any view
Parameter
exclude: Displays the SNMP MIB view excluded.
Include: Displays the SNMP MIB view included.
viewname: Displays the SNMP MIB view according to the mib view name.
mib-view: Specifies the MIB view name.
Description
Use the display snmp-agent mib-view command to view the MIB view
configuration information of the switch.
Example
# Display the information about the currently configured MIB view.
<SW8800> display snmp-agent mib-view
View name:ViewDefault
MIB Subtree:internet
Subtree mask:
Storage-type: nonVolatile
View Type:included
View status:active
View name:ViewDefault
MIB Subtree:snmpUsmMIB
Subtree mask:
Storage-type: nonVolatile
View Type:excluded
View status:active
View name:ViewDefault
MIB Subtree:snmpVacmMIB
Subtree mask:
Storage-type: nonVolatile
View Type:excluded
View status:active
The following table describes the output fields.
SNMP Configuration Commands 901